Exec Ruling 01/2009

on .

Indoor target faces


Colour of the print on the Indoor Target Face shall be code PANTONE ® 282 C or similar

Paper shall be white and print and paper shall not be "shiny".



Field target faces


Paper shall be white and print shall be black code PANTONE ® Black 6

The print shall neither be "shiny" or "light absorbent" (matt)



Hunter target faces


The full face to the target shall be printed in black code PANTONE ® Black 6

The print shall neither be "shiny" or "light absorbent" (matt)

The lines dividing the score zones shall be light grey and shall not be
visible with the naked eye from the shooting line.



Target faces may include :


  • Logo of the IFAA on the right bottom, stating "IFAA APPROVED". The logo and text combined shall not exceed 30mm in height
  • Logo of the Association or Printers on the left bottom, not exceeding 30mm in height.
  • Barcode on the left bottom, not exceeding 10mm in height.

Lines dividing the score zones shall be between 0.5 mm and 0.75mm, depending
on the size of the target face.

Exec Ruling 01/2012

on .

Wooden bows and arrows:

Bamboo, cane, reed or similar species of the grass family are classified as “wood” for the purpose arrow and bow manufacture.

Date posted: 23 Jan 2012

Exec Ruling 01/2013

on .

Article 4E7 of the Bylaws:

Longbow definition a) to be changed from:

A bow of any material, which can be taken down in two parts and put together again into a one piece bow within the handle (only shared once in the handle), which when strung displays one continued unidirectional curve, which is measured as follows:”

to be reworded as follows:

A bow of any material, which can be either an one piece bow or a bow that can be taken down in two parts and put together again as a one piece bow within the handle (only shared once in the handle), which when strung displays one continued unidirectional curve, which is measured as follows:”

.